A good storage cover is essential to protect your Kawasaki watercraft while it is stored.
Our cover is made of 600D solution dyed polyester, which means the color goes all the way through and is much more fade resistant that other covers. Each Kawasaki Jet Ski cover comes with a tie down strap kit for trailering and a storage bag to keep you Kawasaki Cover in while you are out riding.
The Kawasaki covers work great for indoor and outdoor storage applications and the 600D material is breathable to help prevent mildew growth and allow moisture to evaporate.
All Kawasaki covers come in a Black and Gray 2tone color pattern.
Kawasaki covers have a 1 year warranty against defects in workmanship or material.
2000 1100 STX DI
2001 1100 STX DI
2002 1100 STX DI
2003 1100 STX DI
2002 1200 STX-R
2003 1200 STX-R
2004 1200 STX-R
2005 1200 STX-R
1999 900 STX
2000 900 STX
2001 900 STX
2002 900 STX
2003 900 STX
2004 900 STX
2005 900 STX
2006 900 STX
Watercraft Superstore covers have a 1 year manufacturer's warranty against defect in material and workmanship. This warranty does not cover fading, tearing or stains. We do our best to make sure every cover is perfect, but sometimes things happen.
If you should have a problem, please contact Watercraft Superstore @866-957-9277 or email@example.com
to identify your issue.
Your new Watercraft Superstore cover is designed to give years of protection to your PWC. To install the cover, it is best to start at the handle bars and mirrors (if equipped) then pull the cover forward over the bow and rearward over the stern of the craft.
The shock cord installed at the hem of the cover should be pulled down under the rub rail of the PWC. Most covers will hold in place with just the use of the sock cord for stationary storage.
If the craft is going to be towed ro is stored in an area that gets high winds, we suggest using the provided tie down straps to wrap under the PWC to secure the cover.
The watercraft should always be clean before installing any cover to prevent damage to the finish.
Cleaning and Maintenance of the cover should be done periodically to help extend the life of the cover.
To clean the cover, we suggest a mild liquid soap similar to soap used to wash the PWC. For bird droppings or other hard to clean spots, it may be necessary to use a scrub brush.
You can rinse the cover with a standard garden hose. We do not suggest using a pressure washer since the pressure could be high enough to damage the material.
If the cover is used outdoors, we suggest re-treating the cover with a water repellant treatment such as 303 High Tech Fabric Guard (available at Watercraft Superstore or other marine supply stores) at least once a year to help with water repellency as well as UV protection.