$118.95

Storage cover for Polaris 1998-2002 SLH, SLXH, SLX, Pro 1200

Storage cover for Polaris 1998-2002 SLH, SLXH, SLX, Pro 1200
Processing...
$118.95

Brand: Watercraft Superstore
SKU #: 111WS303
Shipping Weight: 6.00 pounds
Quantity in Basket: None

Watercraft Superstore PWC Cover:

A good storage cover is essential to protect your Polaris watercraft while it is stored.

Our cover is made of 600D solution dyed polyester, which means the color goes all the way through and is much more fade resistant that other covers. Each Polaris Jet Ski cover comes with a tie down strap kit for trailering and a storage bag to keep your Polaris Cover in while you are out riding.

The Polaris covers work great for indoor and outdoor storage applications and the 600D material is breathable to help prevent mildew growth and allow moisture to evaporate.

All Polaris covers come in a Black and Gray 2tone color pattern.

Polaris covers have a 1 year warranty against defects in workmanship or material.

2000 Pro 1200
2001 Pro 1200
1998 SLH
1999 SLH
2000 SLH
2001 SLH
1999 SLX
2000 SLX
2001 SLX
1998 SLXH

Watercraft Superstore covers have a 1 year manufacturer's warranty against defect in material and workmanship. This warranty does not cover fading, tearing or stains. We do our best to make sure every cover is perfect, but sometimes things happen.

If you should have a problem, please contact Watercraft Superstore @866-957-9277 or sales@watercraftsuperstore.net to identify your issue.
Your new Watercraft Superstore cover is designed to give years of protection to your PWC. To install the cover, it is best to start at the handle bars and mirrors (if equipped) then pull the cover forward over the bow and rearward over the stern of the craft.

The shock cord installed at the hem of the cover should be pulled down under the rub rail of the PWC. Most covers will hold in place with just the use of the sock cord for stationary storage.

If the craft is going to be towed ro is stored in an area that gets high winds, we suggest using the provided tie down straps to wrap under the PWC to secure the cover. The watercraft should always be clean before installing any cover to prevent damage to the finish.
Cleaning and Maintenance of the cover should be done periodically to help extend the life of the cover.

To clean the cover, we suggest a mild liquid soap similar to soap used to wash the PWC. For bird droppings or other hard to clean spots, it may be necessary to use a scrub brush.

You can rinse the cover with a standard garden hose. We do not suggest using a pressure washer since the pressure could be high enough to damage the material.

If the cover is used outdoors, we suggest re-treating the cover with a water repellant treatment such as 303 High Tech Fabric Guard (available at Watercraft Superstore or other marine supply stores) at least once a year to help with water repellency as well as UV protection.