Handlebar cover for Sea-Doo RXP, RXT, GTI, GTX 2002-2006 Vinyl
    Brand: BlackTip Jetsports
    SKU #: 137BT103
    Shipping Weight: 0.50 pounds
    Quantity in Basket: None


    I acknowledge that this is a custom-made seat cover and that there are no refunds or exchanges. We suggest you order swatches prior to placing your order.

    Our BlackTip Jetsports vinyl handlebar covers staple directly over the factory cover. The covers are a great upgrade by adding that custom look and match beautifully with the BlackTip Jetsports traction mats and seat covers.

    2006 GTI
    2006 GTI SE
    2002 GTX 4 TEC
    2003 GTX 4 TEC
    2004 GTX 4 TEC
    2005 GTX 4 TEC
    2006 GTX 4 TEC
    2006 GTX 4 TEC Limited
    2003 GTX 4 TEC Limited SCIC
    2004 GTX 4 TEC Limited SCIC
    2005 GTX 4 TEC Limited SCIC
    2003 GTX 4 TEC SCIC
    2004 GTX 4 TEC SCIC
    2005 GTX 4 TEC SCIC
    2006 GTX 4 TEC SCIC
    2003 GTX 4 TEC Wake
    2004 GTX 4 TEC Wake
    2005 GTX 4 TEC Wake
    2006 GTX 4 TEC Wake
    2002 GTX DI
    2003 GTX DI
    2005 RXP
    2006 RXP
    2004 RXP SCIC
    2005 RXT
    2006 RXT
    This cover is made out of Vinyl material, and installs just like a seat cover.

    First, remove the pad from the center handlebar assembly.

    You'll notice staples when you turn the handlebar pad over. Remove these staple using a flat head screwdriver or similar tool. For the stubborn staples use a pair of pliers.

    The next step is installing the new BlackTip Jetsports vinyl cover. You will need a power assisted staple gun for this, i.e. air assisted, electric, etc.

    Lay your BlackTip Jetsports vinyl material over the handlebar pad, center it, and fold it back.

    Secure the cover with a single staple and make sure it is centered correctly. Once you've determined the cover is in the correct position you can continue applying staples around the rest of the pad neatly pulling and securing the cover.

    Once the stapling is done install the pad back into the center handlebar assembly.