Storage cover for Sea-Doo 2003-2009 GTX/2002-2003 GTX DI/2002 GTX 4Tec/2005-2009 RXT: Watercraft Superstore
Free Shipping! On Orders Over $75.00 (some restrictions apply)
Product Search

    Secure Checkout


    Storage cover for Sea-Doo 2003-2009 GTX/2002-2003 GTX DI/2002 GTX 4Tec/2005-2009 RXT

    Storage cover for Sea-Doo 2003-2009 GTX/2002-2003 GTX DI/2002 GTX 4Tec/2005-2009 RXT

    Brand: Watercraft Superstore
    SKU #: 111WS101
    Shipping Weight: 6.00 pounds
    Quantity in Basket: None

    A good storage cover is essential to protect your Seadoo watercraft while it is stored.

    Our cover is made of 600D solution dyed polyester, which means the color goes all the way through and
    is much more fade resistant than other covers. Each Sea-Doo PWC storage cover comes with a tie down strap kit for trailering around town.

    The Seadoo covers work great for indoor and outdoor storage applications and the 600D material is breathable to help prevent mildew growth and allow moisture to evaporate.

    All Seadoo covers come in a Black and Gray 2 tone color pattern.

    Seadoo covers have a 1 year warranty against defects in workmanship or material.

    2008 GTX 155
    2009 GTX 155
    2008 GTX 215 SCIC
    2009 GTX 215 SCIC
    2002 GTX 4 TEC
    2003 GTX 4 TEC
    2004 GTX 4 TEC
    2005 GTX 4 TEC
    2006 GTX 4 TEC
    2006 GTX 4 TEC Limited
    2003 GTX 4 TEC Limited SCIC
    2004 GTX 4 TEC Limited SCIC
    2005 GTX 4 TEC Limited SCIC
    2003 GTX 4 TEC SCIC
    2004 GTX 4 TEC SCIC
    2005 GTX 4 TEC SCIC
    2006 GTX 4 TEC SCIC
    2003 GTX 4 TEC Wake
    2004 GTX 4 TEC Wake
    2005 GTX 4 TEC Wake
    2006 GTX 4 TEC Wake
    2002 GTX DI
    2003 GTX DI
    2008 GTX Limited 215 SCIC
    2007 GTX Limited SCIC
    2007 GTX Wake
    2008 GTX Wake 155
    2007 GTX Wake 215 SCIC
    2008 GTX Wake 215 SCIC
    2005 RXT
    2006 RXT
    2007 RXT 215 SCIC
    2008 RXT 215 SCIC
    2009 RXT 215 SCICbr> 2008 RXT X 255
    2009 RXT X 255
    2009 Wake Pro 215
    2009 Wake Pro 215

    Watercraft Superstore covers have a 1 year manufacturer's warranty against defect in material and workmanship. This warranty does not cover fading, tearing or stains which are likely during normal use. Environments with extreme weather conditions might have an adverse effect on the longevity of the material which will not be covered under warranty.

    If you should have a problem or questions, please contact Watercraft Superstore @866-957-9277 or
    Your new Watercraft Superstore cover is designed to give years of protection to your PWC. To install the cover, it is best to start at the handle bars and mirrors (if equipped) then pull the cover forward over the bow and rearward over the stern of the craft.

    The shock cord installed at the hem of the cover should be pulled down under the rub rail of the PWC. Most covers will hold in place with just the use of the shock cord for stationary storage.

    If the craft is going to be towed or is stored in an area that gets high winds, we suggest using the provided tie down straps to wrap under the PWC to secure the cover. The watercraft should always be clean before installing any cover to prevent damage to the finish.
    Cleaning and Maintenance of the cover should be done periodically to help extend the life of the cover.

    To clean the cover, we suggest a mild liquid soap similar to soap used to wash the PWC. For bird droppings or other hard to clean spots, it may be necessary to use a scrub brush.

    You can rinse the cover with a standard garden hose. We do not suggest using a pressure washer since the pressure could be high enough to damage the material.

    If the cover is used outdoors, we suggest re-treating the cover with a water repellant treatment such as 303 High Tech Fabric Guard (available at Watercraft Superstore or other marine supply stores) at least once a year to help with water repellency as well as UV protection.