My Cart: 0 item(s)
$252.95
Solas ABC Impeller for Kawasaki KA-SC-I (13-18)
Brand: Solas
SKU #: 607SO007
Shipping Weight: 4.00 pounds
Quantity in Basket:
None
Super Camber A-B-C-D-E
For a Cost Effective Solution.
The Super Camber A-B-C-D-E series remains one of the most popular products in the personal watercraft market. The Super Camber blade has increased flow and the thrust of the impeller.
1989 650 TS
1990 650 TS
1991 650 TS
1992 650 TS
1993 650 TS
1994 650 TS
1995 650 TS
1996 650 TS
1989 650 SX
1990 650 SX
1991 650 SX
1992 650 SX
1993 650 SX
1994 650 SX
1995 650 SX
1996 650 SX
1991 650 X-2
1992 650 X-2
1993 650 X-2
1994 650 X-2
1995 650 X-2
1996 650 X-2
1991 650JM
1992 650JM
1990 650 TS
1991 650 TS
1992 650 TS
1993 650 TS
1994 650 TS
1995 650 TS
1996 650 TS
1989 650 SX
1990 650 SX
1991 650 SX
1992 650 SX
1993 650 SX
1994 650 SX
1995 650 SX
1996 650 SX
1991 650 X-2
1992 650 X-2
1993 650 X-2
1994 650 X-2
1995 650 X-2
1996 650 X-2
1991 650JM
1992 650JM
1.)Remove and separate the whole jet pump from the PWC
2.)Remove the trail cone (or cap) from the stator
3.)Hold the rear end of the shaft with a bench vise. Remove the impeller with an impeller wrench. Turning counter clockwise will loosen the impeller.
4.)Visually inspect thread on shaft and impeller for debris or damage. Apply grease or anti-seize on the thread before installation.
5.)Screw the impeller by hand; please be careful of the sharp edge of the impeller. Tighten with the impeller wrench. If the impeller feels too tight or not threaded properly, unscrew the impeller, clean and check the thread.
6.)Assemble the pump and put it back on the PWC.
*this installation guide is suggested for reference only
*please refer to your original service manual or contact your PWC dealer for detail
*guide provided by Solas
*some wrenches are optional parts and are available for purchase on our website
2.)Remove the trail cone (or cap) from the stator
3.)Hold the rear end of the shaft with a bench vise. Remove the impeller with an impeller wrench. Turning counter clockwise will loosen the impeller.
4.)Visually inspect thread on shaft and impeller for debris or damage. Apply grease or anti-seize on the thread before installation.
5.)Screw the impeller by hand; please be careful of the sharp edge of the impeller. Tighten with the impeller wrench. If the impeller feels too tight or not threaded properly, unscrew the impeller, clean and check the thread.
6.)Assemble the pump and put it back on the PWC.
*this installation guide is suggested for reference only
*please refer to your original service manual or contact your PWC dealer for detail
*guide provided by Solas
*some wrenches are optional parts and are available for purchase on our website
Impeller Series | Wrench | Seal |
KA Super Camber (ABC/IJK Series) | WR001 | SLA009 |
KB Super Camber (ABC Series) | WR002 | SL002 |
KC Super Camber (ABC Series) | WR005 | Original |
KD Super Camber (ABC Series) | WR001 | SLA009 |
KE Super Camber (ABC/IJK Series) | WR001 | SLA009 |
KF Super Camber (IJK Series) | WR001 | SLA009 |
KG Xprop/Concord Series | WR001 | SLA009 |
KH Dynafly Series | WR001 | SL007 |
KX Concord Series | WR001 | SLA009 |
