My Cart: 0 item(s)
$252.95
Solas Concord Impeller for Kawasaki KE-CD-11/16
Brand: Solas
SKU #: 607SO016
Shipping Weight: 4.00 pounds
Quantity in Basket:
None
Concord - The Power Torque Series With features like a large blade area and a unique geometric blade design, the SOLAS Concord Impeller delivers remarkable thrust and extraordinary efficiency. As four stroke technologies become mainstream in the PWC world, the Concord design truly enhances the engine characteristics, not only delivering incredible acceleration but excellent top end performance. From water skiing to high speed cruising, this technologically advanced power torque design with its radial leading edge will offer everything you could ask for in an impeller.
1995 750 STS
1996 750 STS
1997 750 STS
1998 750 STS
1999 750 STS
2000 750 STS
2001 750 STS
1993 750 Xi Sport
1994 750 Xi Sport
1995 750 Xi Sport
1996 750 Xi Sport
1997 750 Xi Sport
1998 750 Xi Sport
1999 750 Xi Sport
2000 750 Xi Sport
2001 750 Xi Sport
1995 750 ZXi
1996 750 ZXi
1997 750 ZXi
1993 750 Xi
1994 750 Xi
1995 750 Xi
1996 750 Xi
1997 750 Xi
1995 750 SXi
1996 750 SXi
1992 750 SX
1993 750 SX
1994 750 SX
1995 750 SX
1996 750 SX
1994 750 XiR
1993 750 ST
1994 750 ST
1995 750 ST
1996 750 STS
1997 750 STS
1998 750 STS
1999 750 STS
2000 750 STS
2001 750 STS
1993 750 Xi Sport
1994 750 Xi Sport
1995 750 Xi Sport
1996 750 Xi Sport
1997 750 Xi Sport
1998 750 Xi Sport
1999 750 Xi Sport
2000 750 Xi Sport
2001 750 Xi Sport
1995 750 ZXi
1996 750 ZXi
1997 750 ZXi
1993 750 Xi
1994 750 Xi
1995 750 Xi
1996 750 Xi
1997 750 Xi
1995 750 SXi
1996 750 SXi
1992 750 SX
1993 750 SX
1994 750 SX
1995 750 SX
1996 750 SX
1994 750 XiR
1993 750 ST
1994 750 ST
1995 750 ST
1.)Remove and separate the whole jet pump from the PWC
2.)Remove the trail cone (or cap) from the stator
3.)Hold the rear end of the shaft with a bench vise. Remove the impeller with an impeller wrench. Turning counter clockwise will loosen the impeller.
4.)Visually inspect thread on shaft and impeller for debris or damage. Apply grease or anti-seize on the thread before installation.
5.)Screw the impeller by hand; please be careful of the sharp edge of the impeller. Tighten with the impeller wrench. If the impeller feels too tight or not threaded properly, unscrew the impeller, clean and check the thread.
6.)Assemble the pump and put it back on the PWC.
*this installation guide is suggested for reference only
*please refer to your original service manual or contact your PWC dealer for detail
*guide provided by Solas
*some wrenches are optional parts and are available for purchase on our website
2.)Remove the trail cone (or cap) from the stator
3.)Hold the rear end of the shaft with a bench vise. Remove the impeller with an impeller wrench. Turning counter clockwise will loosen the impeller.
4.)Visually inspect thread on shaft and impeller for debris or damage. Apply grease or anti-seize on the thread before installation.
5.)Screw the impeller by hand; please be careful of the sharp edge of the impeller. Tighten with the impeller wrench. If the impeller feels too tight or not threaded properly, unscrew the impeller, clean and check the thread.
6.)Assemble the pump and put it back on the PWC.
*this installation guide is suggested for reference only
*please refer to your original service manual or contact your PWC dealer for detail
*guide provided by Solas
*some wrenches are optional parts and are available for purchase on our website
Impeller Series | Wrench | Seal |
KA Super Camber (ABC/IJK Series) | WR001 | SLA009 |
KB Super Camber (ABC Series) | WR002 | SL002 |
KC Super Camber (ABC Series) | WR005 | Original |
KD Super Camber (ABC Series) | WR001 | SLA009 |
KE Super Camber (ABC/IJK Series) | WR001 | SLA009 |
KF Super Camber (IJK Series) | WR001 | SLA009 |
KG Xprop/Concord Series | WR001 | SLA009 |
KH Dynafly Series | WR001 | SL007 |
KX Concord Series | WR001 | SLA009 |
