Solas Concord Impeller for Sea-Doo SD-CD-14/22: Watercraft Superstore
Free Shipping! On Orders Over $75.00 (some restrictions apply)
Product Search

    Secure Checkout


    Solas Concord Impeller for Sea-Doo SD-CD-14/22

    Solas Concord Impeller for Sea-Doo SD-CD-14/22

    Brand: Solas
    SKU #: 607SO064
    Shipping Weight: 4.00 pounds
    Quantity in Basket: None

    SOLAS has a wide range of propulsion designs from straight pitch impellers (like the Super Camber series, X Prop, and Concord) to our newly developed Dynafly series. SOLAS continually develops and improves its impellers. Concord - The Power Torque Series With features like a large blade area and a unique geometric blade design, the SOLAS Concord Impeller delivers remarkable thrust and extraordinary efficiency. As four stroke technology becomes mainstream in the PWC world, the Concord design truly enhances the engine characteristics, not only delivering incredible acceleration but excellent top end performance. From water skiing to high speed cruising, this technologically advanced power torque design with its radial leading edge will offer everything you could ask for in an impeller.

    140MM Pump Diameter

    1996 GTX
    1997 GTX

    1995 XP
    1996 XP
    1997 XP

    1995 SPX
    1996 SPX
    1997 SPX

    1997 GS
    1998 GS
    1999 GS
    2000 GS
    2001 GS

    1997 GSI
    1998 GSI
    1999 GSI
    2000 GSI
    2001 GSI

    1996 GTI
    1997 GTI
    1998 GTI
    1999 GTI
    2000 GTI

    1996 GTS
    1997 GTS
    1998 GTS
    1999 GTS
    2000 GTS
    1.)Remove and separate the whole jet pump from the PWC

    2.)Remove the trail cone (or cap) from the stator

    3.)Hold the rear end of the shaft with a bench vise. Remove the impeller with an impeller wrench. Turning counter clockwise will loosen the impeller.

    4.)Visually inspect thread on shaft and impeller for debris or damage. Apply grease or anti-seize on the thread before installation.

    5.)Screw the impeller by hand; please be careful of the sharp edge of the impeller. Tighten with the impeller wrench. If the impeller feels too tight or not threaded properly, unscrew the impeller, clean and check the thread.

    6.)Assemble the pump and refill O/E pump oil or grease to spec.

    *this installation guide is suggested for reference only
    *please refer to your original service manual or contact your PWC dealer for detail
    *guide provided by Solas
    *some wrenches are optional parts and are available for purchase on our website

    Impeller Series



    SD Super Camber (ABC Series)



    SD Super Camber (IJK Series)



    SD, ST Xprop Series



    SD, SF, ST Concord Series



    ST Dynafly Series



    SR Concord Series


    SLA011 (24mm shaft)
    SLA011A (27mm shaft)

    SRZ, SRX Concord Series