$294.95

Solas Concord Impeller for Sea-Doo SRZ-CD-14/19

Solas Concord Impeller for Sea-Doo SRZ-CD-14/19
Processing...
$294.95

Brand: Solas
SKU #: 607SO183
Shipping Weight: 4.00 pounds
Quantity in Basket: None

Concord - The Power Torque Series With features like a large blade area and a unique geometric blade design, the SOLAS Concord Impeller delivers remarkable thrust and extraordinary efficiency. As four stroke technologies become mainstream in the PWC world, the Concord design truly enhances the engine characteristics, not only delivering incredible acceleration but excellent top end performance. From water skiing to high speed cruising, this technologically advanced power torque design with its radial leading edge will offer everything you could ask for in an impeller.

WARNING:This product can expose you to chemicals which are knownn to the State of California to cause cancer and birth defects or other reproductive harm. For more information go tohttps://www.P65Warnings.ca.gov.

2009 RXP 215HP
2010 RXP 215HP
2011 RXP 215HP
2012 RXP 215HP
2013 RXP 215HP

2012 GTR 215HP
2013 GTR 215HP

2009 RXP 215HP
2010 RXP 215HP
1.)Remove and separate the whole jet pump from the PWC

2.)Remove the trail cone (or cap) from the stator

3.)Hold the rear end of the shaft with a bench vise. Remove the impeller with an impeller wrench. Turning counter clockwise will loosen the impeller.

4.)Visually inspect thread on shaft and impeller for debris or damage. Apply grease or anti-seize on the thread before installation.

5.)Screw the impeller by hand; please be careful of the sharp edge of the impeller. Tighten with the impeller wrench. If the impeller feels too tight or not threaded properly, unscrew the impeller, clean and check the thread.

6.)Assemble the pump and refill O/E pump oil or grease to spec.

*this installation guide is suggested for reference only
*please refer to your original service manual or contact your PWC dealer for detail
*guide provided by Solas
*some wrenches are optional parts and are available for purchase on our website

Impeller Series

Wrench

Seal

SD Super Camber (ABC Series)

WR001

SL007

SD Super Camber (IJK Series)

WR001

SL007

SD, ST Xprop Series

WR001

SL007

SD, SF, ST Concord Series

WR001

SL007

ST Dynafly Series

WR001

SL007

SR Concord Series

WR011

SLA011 (24mm shaft)
SLA011A (27mm shaft)

SRZ, SRX Concord Series

WR012

SLA012