Solas DynaFly Impeller for Yamaha YG-DF-15/22: Watercraft Superstore
Free Shipping! On Orders Over $75.00 (some restrictions apply)
Product Search

    Secure Checkout

    $281.95

    Solas DynaFly Impeller for Yamaha YG-DF-15/22

    Solas DynaFly Impeller for Yamaha YG-DF-15/22
    Processing...
    $281.95

    Brand: Solas
    SKU #: 607SO168
    Shipping Weight: 4.00 pounds
    Quantity in Basket: None



    Dyna Fly-Maximum Acceleration

    SOLAS's new impeller is designed to give high compression ratio pumps a stronger acceleration with less cavitation.
    The impeller is capable of giving your PWC an incredible boost in its performance.
    The SOLAS product line includes Dynafly impellers for the Kawasaki Ultra 150 pump and the SeaDoo 951 pump.
    SOLAS also has developed new impellers for other pumps.

    2004 FX High Output
    2005 FX High Output
    2006 FX High Output
    2007 FX High Output
    2008 FX High Output

    2004 FX Cruiser High Output
    2005 FX Cruiser High Output
    2006 FX Cruiser High Output
    2007 FX Cruiser High Output
    2008 FX Cruiser High Output
    1.)Remove and separate the whole jet pump from the PWC

    2.)For YH Series impeller, remove the trail cone (or cap) from the stator. For all others, hold the front end of the drive shaft with a shaft holder (optional part) on bench vise.

    3.)Hold the rear end of the shaft with a bench vise. Remove the impeller with an impeller wrench (optional part). Turning counter clockwise will loosen the impeller.

    4.)Visually inspect thread on shaft and impeller for debris or damage. Apply grease or anti-seize on the thread before installation.

    5.)Screw the impeller by hand; please be careful of the sharp edge of the impeller. Tighten with the impeller wrench. If the impeller feels too tight or not threaded properly, unscrew the impeller, clean and check the thread.

    6.)Assemble the pump and refill O/E pump oil or grease to spec. (for YH series assemble the pump and put it back on the PWC)

    *this installation guide is suggested for reference only
    *please refer to your original service manual or contact your PWC dealer for detail
    *guide provided by Solas
    *some wrenches are optional parts and are available for purchase on our website

    Impeller Series

    Wrench

    Holder

    Seal

    YA Super Camber (ABC/IJK Series)

    WR003

    WR003H

    SL003

    YB Super Camber (IJK Series)
    XProp Series, Concord Series

    WR004

    WR004H

    SLA008 (18mm shaft)
    SL008A (15mm shaft)

    YD Super Camber Series (IJK Series) Xprop Series

    WR004

    WR004H

    SLA008

    YD Concord Series

    WR007

    WR007H

    SLA009A

    YF Concord/Xprop Series

    WR007

    WR007H

    SLA009

    YG Dynafly Series

    WR007

    WR007H

    SLA009

    YS Dynafly Series

    WR014

    WR014H

    SLA014

    YS Concord Series

    WR014

    WR014H

    SLA016

    YH Concord Series (only for 2005-06 VX110 Sport and VX700 2006)

    WR001

     

    SLA009