$281.95

Solas DynaFly Impeller for Yamaha YS-DF-14/21

Solas DynaFly Impeller for Yamaha YS-DF-14/21
Processing...
$281.95

Brand: Solas
SKU #: 607SO167
Shipping Weight: 4.00 pounds
Quantity in Basket: None

Dyna Fly-Maximum Acceleration

SOLAS's new impeller is designed to give high compression ratio pumps a stronger acceleration with less cavitation.
The impeller is capable of giving your PWC an incredible boost in its performance.
The SOLAS product line includes Dynafly impellers for the Kawasaki Ultra 150 pump and the SeaDoo 951 pump.
SOLAS also has developed new impellers for other pumps.

WARNING:This product can expose you to chemicals which are knownn to the State of California to cause cancer and birth defects or other reproductive harm. For more information go tohttps://www.P65Warnings.ca.gov.

2008 FX SHO
2009 FX SHO
2010 FX SHO
2011 FX SHO
2012 FX SHO

2008 FX Cruiser SHO
2009 FX Cruiser SHO
2010 FX Cruiser SHO
2011 FX Cruiser SHO
2012 FX Cruiser SHO

2008 FZR SHO
2009 FZR SHO
2010 FZR SHO
2011 FZR SHO
2012 FZR SHO

2008 FZS SHO
2009 FZS SHO
2010 FZS SHO
2011 FZS SHO
2012 FZS SHO

2009 FX High Output
2010 FX High Output
2011 FX High Output
2012 FX High Output

2009 FX CRUISER High Output
2010 FX CRUISER High Output
2011 FX CRUISER High Output
2012 FX CRUISER High Output
1.)Remove and separate the whole jet pump from the PWC

2.)For YH Series impeller, remove the trail cone (or cap) from the stator. For all others, hold the front end of the drive shaft with a shaft holder (optional part) on bench vise.

3.)Hold the rear end of the shaft with a bench vise. Remove the impeller with an impeller wrench (optional part). Turning counter clockwise will loosen the impeller.

4.)Visually inspect thread on shaft and impeller for debris or damage. Apply grease or anti-seize on the thread before installation.

5.)Screw the impeller by hand; please be careful of the sharp edge of the impeller. Tighten with the impeller wrench. If the impeller feels too tight or not threaded properly, unscrew the impeller, clean and check the thread.

6.)Assemble the pump and refill O/E pump oil or grease to spec. (for YH series assemble the pump and put it back on the PWC)

*this installation guide is suggested for reference only
*please refer to your original service manual or contact your PWC dealer for detail
*guide provided by Solas
*some wrenches are optional parts and are available for purchase on our website

Impeller Series

Wrench

Holder

Seal

YA Super Camber (ABC/IJK Series)

WR003

WR003H

SL003

YB Super Camber (IJK Series)
XProp Series, Concord Series

WR004

WR004H

SLA008 (18mm shaft)
SL008A (15mm shaft)

YD Super Camber Series (IJK Series) Xprop Series

WR004

WR004H

SLA008

YD Concord Series

WR007

WR007H

SLA009A

YF Concord/Xprop Series

WR007

WR007H

SLA009

YG Dynafly Series

WR007

WR007H

SLA009

YS Dynafly Series

WR014

WR014H

SLA014

YS Concord Series

WR014

WR014H

SLA016

YH Concord Series (only for 2005-06 VX110 Sport and VX700 2006)

WR001

 

SLA009