Solas IJK Impeller for Yamaha YB-SC-J (14.7-18.5): Watercraft Superstore
Free Shipping! On Orders Over $75.00 (some restrictions apply)
Product Search

    Secure Checkout

    $252.95

    Solas IJK Impeller for Yamaha YB-SC-J (14.7-18.5)

    Solas IJK Impeller for Yamaha YB-SC-J (14.7-18.5)
    Processing...
    $252.95

    Brand: Solas
    SKU #: 607SO131
    Shipping Weight: 4.00 pounds
    Quantity in Basket: None



    Super Camber A-B-C-D-E - For a Cost Effective Solution. The Super Camber A-B-C-D-E series remains one of the most popular products in the personal watercraft market. The Super Camber blade has increased flow and the thrust of the impeller.

    1998 GP800
    1999 GP800
    2000 GP800
    2001 GP800
    2002 GP800

    1994 Wave Raider 700
    1995 Wave Raider 700
    1996 Wave Raider 700
    1997 Wave Raider 700

    1994 1995 1996 1997 - 1997 Wave Deluxe
    1994 - 1997 Wave Venture
    1.)Remove and separate the whole jet pump from the PWC

    2.)For YH Series impeller, remove the trail cone (or cap) from the stator. For all others, hold the front end of the drive shaft with a shaft holder (optional part) on bench vise.

    3.)Hold the rear end of the shaft with a bench vise. Remove the impeller with an impeller wrench (optional part). Turning counter clockwise will loosen the impeller.

    4.)Visually inspect thread on shaft and impeller for debris or damage. Apply grease or anti-seize on the thread before installation.

    5.)Screw the impeller by hand; please be careful of the sharp edge of the impeller. Tighten with the impeller wrench. If the impeller feels too tight or not threaded properly, unscrew the impeller, clean and check the thread.

    6.)Assemble the pump and refill O/E pump oil or grease to spec. (for YH series assemble the pump and put it back on the PWC)

    *this installation guide is suggested for reference only
    *please refer to your original service manual or contact your PWC dealer for detail
    *guide provided by Solas
    *some wrenches are optional parts and are available for purchase on our website

    Impeller Series

    Wrench

    Holder

    Seal

    YA Super Camber (ABC/IJK Series)

    WR003

    WR003H

    SL003

    YB Super Camber (IJK Series)
    XProp Series, Concord Series

    WR004

    WR004H

    SLA008 (18mm shaft)
    SL008A (15mm shaft)

    YD Super Camber Series (IJK Series) Xprop Series

    WR004

    WR004H

    SLA008

    YD Concord Series

    WR007

    WR007H

    SLA009A

    YF Concord/Xprop Series

    WR007

    WR007H

    SLA009

    YG Dynafly Series

    WR007

    WR007H

    SLA009

    YS Dynafly Series

    WR014

    WR014H

    SLA014

    YS Concord Series

    WR014

    WR014H

    SLA016

    YH Concord Series (only for 2005-06 VX110 Sport and VX700 2006)

    WR001

     

    SLA009