$216.85

Solas IJK Series Impeller for Yamaha YB-SC-I (14.5-18)

Solas IJK Series Impeller for Yamaha YB-SC-I (14.5-18)
Processing...
$216.85

Brand: Solas
SKU #: 607SO129
Shipping Weight: 4.00 pounds
Quantity in Basket: None

Super Camber A-B-C-D-E
For a Cost Effective Solution.
The Super Camber A-B-C-D-E series remains one of the most popular products in the personal watercraft market.
The Super Camber blade has increased flow and the thrust of the impeller.

WARNING:This product can expose you to chemicals which are knownn to the State of California to cause cancer and birth defects or other reproductive harm. For more information go tohttps://www.P65Warnings.ca.gov.

1996 Wave Raider 760

1997 GP760
1998 GP760
1999 GP760
2000 GP760

1998 XL800
1999 XL800
1.)Remove and separate the whole jet pump from the PWC

2.)For YH Series impeller, remove the trail cone (or cap) from the stator. For all others, hold the front end of the drive shaft with a shaft holder (optional part) on bench vise.

3.)Hold the rear end of the shaft with a bench vise. Remove the impeller with an impeller wrench (optional part). Turning counter clockwise will loosen the impeller.

4.)Visually inspect thread on shaft and impeller for debris or damage. Apply grease or anti-seize on the thread before installation.

5.)Screw the impeller by hand; please be careful of the sharp edge of the impeller. Tighten with the impeller wrench. If the impeller feels too tight or not threaded properly, unscrew the impeller, clean and check the thread.

6.)Assemble the pump and refill O/E pump oil or grease to spec. (for YH series assemble the pump and put it back on the PWC)

*this installation guide is suggested for reference only
*please refer to your original service manual or contact your PWC dealer for detail
*guide provided by Solas
*some wrenches are optional parts and are available for purchase on our website

Impeller Series

Wrench

Holder

Seal

YA Super Camber (ABC/IJK Series)

WR003

WR003H

SL003

YB Super Camber (IJK Series)
XProp Series, Concord Series

WR004

WR004H

SLA008 (18mm shaft)
SL008A (15mm shaft)

YD Super Camber Series (IJK Series) Xprop Series

WR004

WR004H

SLA008

YD Concord Series

WR007

WR007H

SLA009A

YF Concord/Xprop Series

WR007

WR007H

SLA009

YG Dynafly Series

WR007

WR007H

SLA009

YS Dynafly Series

WR014

WR014H

SLA014

YS Concord Series

WR014

WR014H

SLA016

YH Concord Series (only for 2005-06 VX110 Sport and VX700 2006)

WR001

 

SLA009