My Cart: 0 item(s)
$208.85
Solas Xprop Impeller for Kawasaki KF-SC-XO (18-23.5)
Brand: Solas
SKU #: 607SO030
Shipping Weight: 4.00 pounds
Quantity in Basket:
None
Availability: Sorry, we are currently sold out of 'Solas Xprop Impeller for Kawasaki KF-SC-XO (18-23.5)'. Please check back later.
X-prop
High Speed & Ultimate Performance.
The SOLAS X prop gives you the most powerful propulsion in the water from an advanced design that incorporates a high compression hub and cambered blades.
Enthusiasts looking for speed and acceleration from the novice to the professional will be satisfied using this impeller.
You can trust the harsh field testing of the X prop by Team SOLAS.
1996 STX
1997 STX
1998 STX
1999 STX
2000 STX
1996 STS
1997 STS
1998 STS
1999 STS
2000 STS
1996 ZXi
1997 ZXi
1998 ZXi
1999 ZXi
2000 ZXi
1997 STX
1998 STX
1999 STX
2000 STX
1996 STS
1997 STS
1998 STS
1999 STS
2000 STS
1996 ZXi
1997 ZXi
1998 ZXi
1999 ZXi
2000 ZXi
1.)Remove and separate the whole jet pump from the PWC
2.)Remove the trail cone (or cap) from the stator
3.)Hold the rear end of the shaft with a bench vise. Remove the impeller with an impeller wrench. Turning counter clockwise will loosen the impeller.
4.)Visually inspect thread on shaft and impeller for debris or damage. Apply grease or anti-seize on the thread before installation.
5.)Screw the impeller by hand; please be careful of the sharp edge of the impeller. Tighten with the impeller wrench. If the impeller feels too tight or not threaded properly, unscrew the impeller, clean and check the thread.
6.)Assemble the pump and put it back on the PWC.
*this installation guide is suggested for reference only
*please refer to your original service manual or contact your PWC dealer for detail
*guide provided by Solas
*some wrenches are optional parts and are available for purchase on our website
2.)Remove the trail cone (or cap) from the stator
3.)Hold the rear end of the shaft with a bench vise. Remove the impeller with an impeller wrench. Turning counter clockwise will loosen the impeller.
4.)Visually inspect thread on shaft and impeller for debris or damage. Apply grease or anti-seize on the thread before installation.
5.)Screw the impeller by hand; please be careful of the sharp edge of the impeller. Tighten with the impeller wrench. If the impeller feels too tight or not threaded properly, unscrew the impeller, clean and check the thread.
6.)Assemble the pump and put it back on the PWC.
*this installation guide is suggested for reference only
*please refer to your original service manual or contact your PWC dealer for detail
*guide provided by Solas
*some wrenches are optional parts and are available for purchase on our website
Impeller Series | Wrench | Seal |
KA Super Camber (ABC/IJK Series) | WR001 | SLA009 |
KB Super Camber (ABC Series) | WR002 | SL002 |
KC Super Camber (ABC Series) | WR005 | Original |
KD Super Camber (ABC Series) | WR001 | SLA009 |
KE Super Camber (ABC/IJK Series) | WR001 | SLA009 |
KF Super Camber (IJK Series) | WR001 | SLA009 |
KG Xprop/Concord Series | WR001 | SLA009 |
KH Dynafly Series | WR001 | SL007 |
KX Concord Series | WR001 | SLA009 |
