Solas Xprop Impeller for Sea-Doo SD-SC-XO (16.5/23.5): Watercraft Superstore
Free Shipping! On Orders Over $75.00 (some restrictions apply)
Product Search

    Secure Checkout


    Solas Xprop Impeller for Sea-Doo SD-SC-XO (16.5/23.5)

    Solas Xprop Impeller for Sea-Doo SD-SC-XO (16.5/23.5)

    Brand: Solas
    SKU #: 607SO077
    Shipping Weight: 4.00 pounds
    Quantity in Basket: None

    X-prop - High Speed & Ultimate Performance. The SOLAS X prop gives you the most powerful propulsion in the water from an advanced design that incorporates a high compression hub and cambered blades. Enthusiasts looking for speed and acceleration from the novice to the professional will be satisfied using this impeller. You can trust the harsh field testing of the X prop by Team SOLAS.

    140mm Diameter Pump

    1996 XP
    1997 XP

    1996 SPX
    1997 SPX
    1998 SPX

    1996 GSX
    1997 GSX
    1998 GSX

    1996 GTX
    1997 GTX

    1.)Remove and separate the whole jet pump from the PWC

    2.)Remove the trail cone (or cap) from the stator

    3.)Hold the rear end of the shaft with a bench vise. Remove the impeller with an impeller wrench. Turning counter clockwise will loosen the impeller.

    4.)Visually inspect thread on shaft and impeller for debris or damage. Apply grease or anti-seize on the thread before installation.

    5.)Screw the impeller by hand; please be careful of the sharp edge of the impeller. Tighten with the impeller wrench. If the impeller feels too tight or not threaded properly, unscrew the impeller, clean and check the thread.

    6.)Assemble the pump and refill O/E pump oil or grease to spec.

    *this installation guide is suggested for reference only
    *please refer to your original service manual or contact your PWC dealer for detail
    *guide provided by Solas
    *some wrenches are optional parts and are available for purchase on our website

    Impeller Series



    SD Super Camber (ABC Series)



    SD Super Camber (IJK Series)



    SD, ST Xprop Series



    SD, SF, ST Concord Series



    ST Dynafly Series



    SR Concord Series


    SLA011 (24mm shaft)
    SLA011A (27mm shaft)

    SRZ, SRX Concord Series