Storage cover for Yamaha 1996-2018 Super Jet 700: Watercraft Superstore
Free Shipping! On Orders Over $75.00 (some restrictions apply)
Product Search

    Secure Checkout


    Storage cover for Yamaha 1996-2018 Super Jet 700

    Storage cover for Yamaha 1996-2018 Super Jet 700

    Brand: Watercraft Superstore
    SKU #: 111WS409
    Shipping Weight: 6.00 pounds
    Quantity in Basket: None

    Watercraft Superstore PWC Cover: Our cover is made of 600D solution dyed polyester, which means the color goes all the way through and is much more fade resistant that other covers. Each Yamaha Jet Ski cover comes with a tie down strap kit for trailering and a storage bag to keep your Yamaha Cover in while you are out riding.

    The Yamaha covers work great for indoor and outdoor storage applications and the 600D material is breathable to help prevent mildew growth and allow moisture to evaporate.

    All Yamaha covers come in a Black and Gray 2tone color pattern.

    Yamaha covers have a 1 year warranty against defects in workmanship or material.

    1996 SUPER JET 700
    1997 SUPER JET 700
    1998 SUPER JET 700
    1999 SUPER JET 700
    2000 SUPER JET 700
    2001 SUPER JET 700
    2002 SUPER JET 700
    2003 SUPER JET 700
    2004 SUPER JET 700
    2006 SUPER JET 700
    2009 SUPER JET
    2010 SUPER JET
    2011 SUPER JET
    2013 SUPER JET
    2014 SUPER JET
    2015 SUPER JET
    2016 SUPER JET
    2017 SUPER JET
    2018 SUPER JET
    Watercraft Superstore covers have a 1 year manufacturer's warranty against defect in material and workmanship. This warranty does not cover fading, tearing or stains which are likely during normal use. Environments with extreme weather conditions might have an adverse effect on the longevity of the material which will not be covered under warranty.

    If you should have a problem or questions, please contact Watercraft Superstore @866-957-9277 or
    Your new Watercraft Superstore cover is designed to give years of protection to your PWC. To install the cover, it is best to start at the handle bars and mirrors (if equipped) then pull the cover forward over the bow and rearward over the stern of the craft.

    The shock cord installed at the hem of the cover should be pulled down under the rub rail of the PWC. Most covers will hold in place with just the use of the sock cord for stationary storage.

    If the craft is going to be towed ro is stored in an area that gets high winds, we suggest using the provided tie down straps to wrap under the PWC to secure the cover. The watercraft should always be clean before installing any cover to prevent damage to the finish.
    Cleaning and Maintenance of the cover should be done periodically to help extend the life of the cover.

    To clean the cover, we suggest a mild liquid soap similar to soap used to wash the PWC. For bird droppings or other hard to clean spots, it may be necessary to use a scrub brush.

    You can rinse the cover with a standard garden hose. We do not suggest using a pressure washer since the pressure could be high enough to damage the material.

    If the cover is used outdoors, we suggest re-treating the cover with a water repellant treatment such as 303 High Tech Fabric Guard (available at Watercraft Superstore or other marine supply stores) at least once a year to help with water repellency as well as UV protection.