Sea-Doo Seat Cover
GTX Ltd BVIC/ GTX Ltd 215/ GTX 155/ GTX 255/ GTX 215 2007 2008 2009
-Click on seat panel above.
-Choose the color below.
-Repeat to change color
-Add to basket when complete.
Create a new look with a fresh BlackTip Jetsports Seat Cover! Our BlackTip Jetsports Seat Cover allows you to see the pattern online and create your own color scheme for your brand new jet ski seat cover. The cover is made from high quality marine vinyl and designed to last for years. The individual sections provides for a tight, custom fit and look.
Vinyl material available in colors Black, Burgundy, Dark Gray, Dark Green, Deep Blue, Gray, Lime Green, Orange, Pink, Purple, Red, Royal Blue, Teal, White and Yellow.
Carbon-Fiber material available in colors Black, Blue, Yellow, Dark Gray, Copper, Purple, Silver, Red and White .
Non-Slip material available in Black only.
Please note, All seat covers are custom made to suit your specific order. There are no refunds or exchanges on any upholstery items.
**Seat Covers DO NOT include a strap
If you need assistance choosing colors and/or material for your custom seat cover, please contact a member of our Watercraft Superstore Team and we would be glad to help you, toll free 866-957-9277 or you may email us Sales@WatercraftSuperstore.net
WARNING: This product can expose you to chemicals including Di-Iso-Nonyl Phthalate, which is known to the State of California to cause cancer, cause birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
2008 GTX 155
2009 GTX 155
2009 GTX 215 SCIC
2007 GTX Limited
2008 GTX Wake 155
2007 GTX Wake 215 SCIC
If you should have a problem, please contact Watercraft Superstore @866-957-9277 or firstname.lastname@example.org to identify your issue.
Staple Gun (preferably electric or air powered)
Stainless Steel staples to fit your gun
Needle nose pliers
Flat blade screwdriver or other type of tool to pry out staples
Some seats have straps, handles, or brackets they may require additional tools for removal.
Most BlackTip Jetsports seat covers are designed to install over your factory cover. The old cover may need to be removed or sections of it removed if it is torn or damaged. If the original is badly damaged or the seat foam is wet you should remove it completely and let the foam dry before installing the new cover.
If the foam is damaged you will need to repair it before installing the new cover or the damage will show through. Small cracks can usually be repaired with duct tape to hide the damage. Larger repairs can be made by replacing the damaged foam and then sanding the new foam to match the shape of the old foam. If your seat has extensive damage we recommend taking it and your new cover to a local upholstery shop.
Installation of the cover is easiest if the vinyl is warm, a nice sunny day, a warm shop, or a hair dryer can accomplish this. Make sure you do not have any sharp corner or protrusions before installing.
Align the cover onto the seat so that it is centered over the main section of the seat. Put a staple at each corner or curve including the front of the seat (these staples may need to be removed later as you stretch the material into place). Once you have the material aligned you can continue stretching and fitting the cover around the seat. As you staple and stretch it may be necessary to trim away excess material. You will want to use many staples around the perimeter of the seat use the original as your guide. After the cover is completely stapled in place you should trim away any excess material.
On some models with a strap you can reinstall the strap at this time if you prefer.
To clean the cover, we suggest a mild liquid soap similar to soap used to wash the PWC. For bird droppings or other hard to clean spots, it may be necessary to use a scrub brush.
You can rinse the cover with a standard garden hose. We do not suggest using a pressure washer since the pressure could be high enough to damage the material.