A good Storage cover with vents is essential to protect your Yamaha watercraft while traveling around town or stored away.
Our cover is made of 600D solution dyed polyester, which means the color goes all the way through and
is much more fade resistant than other covers. Each PWC Storage cover with vents comes with a tie down strap kit for trailering around town.
These covers work great for indoor and outdoor storage applications and the 600D material is breathable to help prevent mildew growth and allow moisture to evaporate.
All covers come in a Black and Gray 2 tone color pattern. They have a reflective strip for traveling, as well as an opening for the dockline when not in use.
All covers have a 1 year warranty against defects in workmanship or material.
2015 VXR
2015 VXS
2015 VX Cruiser
2015 VX Deluxe
2015 VX
2016 VXR
2016 VXS
2016 VX Cruiser HO
2016 VX Limited
2016 VX Cruiser
2016 VX Deluxe
2016 VX
2017 VX
2017 VX Deluxe
2017 VX Cruiser
2017 VX Limited
2017 VX Cruiser HO
2017 VXR
2017 GP1800
2018 VX
2018 VX Deluxe
2018 VX Cruiser
2018 VX Limited
2018 VX Cruiser HO
2018 VXR
2018 GP1800
Your new Watercraft Superstore cover is designed to give years of protection to your PWC. To install the cover, it is best to start at the handle bars and mirrors (if equipped) then pull the cover forward over the bow and rearward over the stern of the craft.
The shock cord installed at the hem of the cover should be pulled down under the rub rail of the PWC. Most covers will hold in place with just the use of the sock cord for stationary storage.
If the craft is going to be towed ro is stored in an area that gets high winds, we suggest using the provided tie down straps to wrap under the PWC to secure the cover.
The watercraft should always be clean before installing any cover to prevent damage to the finish.
Watercraft Superstore covers have a 1 year manufacturer's warranty against defect in material and workmanship. This warranty does not cover fading, tearing or stains which are likely during normal use. Environments with extreme weather conditions might have an adverse effect on the longevity of the material which will not be covered under warranty.
If you should have a problem or questions, please contact Watercraft Superstore @727-499-9707 or
sales@watercraftsuperstore.net
Cleaning and Maintenance of the cover should be done periodically to help extend the life of the cover.
To clean the cover, we suggest a mild liquid soap similar to soap used to wash the PWC. For bird droppings or other hard to clean spots, it may be necessary to use a scrub brush.
You can rinse the cover with a standard garden hose. We do not suggest using a pressure washer since the pressure could be high enough to damage the material.
If the cover is used outdoors, we suggest re-treating the cover with a water repellant treatment such as 303 High Tech Fabric Guard (available at Watercraft Superstore or other marine supply stores) at least once a year to help with water repellency as well as UV protection.
